This lab was a refresher activity on what we learned in Chapter 5 about RIPv1 and its configuration. The lab opened with a pre-done topology which is the basic topology of the chapter. It consisted of three routers and four switches. The lab's instructions said to execute the basic configurations on each of the routers using the routing table that the instructions provide. The first thing I had to do for this lab was configure the RIP on R1using the instructions the lab gave me. At first, I messed up because I put the individual network addresses in, but after reading later I saw that the lab required me to enter the summarized network addresses. Then I repeated that process for the other two routers. I also had to set passive interfaces which were not connected to the routers. Overall, this lab was pretty simple and because the instructions told me how to do it, it was even easier.
 |
| Topology |
 |
| Routing Table |
No comments:
Post a Comment